
ONE-LOK SLCE
Wedge-action restraint for PVC pipe at a mechanical joint. UL listed and FM approved, 4 to 12 in.
Not sure which part fits?
Your regional team can match the job to the right product.
Can’t find what you need?
Your regional team can send it or point you to it.
The water company you can count on. Because of the people behind it.
Catalog render. Your size is in the item number.
Wedge-action restraint for mechanical joints on PVC pipe, 3 to 12 in.: C900 and C909 from 4 in., IPS from 3 in.
Call for pricing
Priced by request at this size. Add it to your quote list or call 800.999.2550.
Your distributor
SIGMA sells through waterworks distributors. Order with item # SLCS12.
Quote from SIGMA
Sends your quote list to the right regional team.
Submittal PDF not loaded yet.
Need help on the job?
Call 800.999.2550. Real people answer, mid-job too.
Right restraint? Selection ToolHow far to restrain? Calculator
ONE-LOK SLCS · SLCS12
Details, specs, every size and the questions buyers ask. Open what you need.
Water under pressure pushes a mechanical joint apart. ONE-LOK SLCS holds it on PVC pipe: wedge segments in the follower gland grip the pipe when the actuating bolts are tightened, and their cam action lets them grip harder as thrust builds. Its catalog lists AWWA C900, AWWA C909 and ASTM D2241 IPS PVC pipe, 3 to 12 in. For IPS pipe, take off the two-piece spacer and use a transition gasket.
| Item number | SLCS12 |
|---|---|
| Pressure rating, submittal table | 235 psi |
| Pressure rating rule | Equal to the working pressure rating of the pipe it is installed on, per the submittal |
| Safety factor | 2:1, per the submittal |
| Joint deflection | Within the pipe maker's allowable deflection for C900 PVC pipe bells, per the submittal |
| PVC pipe OD, C900 (IPS at 3 in.) | 13.20 in. |
| Gland weight, without T-bolts or gasket | 28.0 lb |
| Wedge bolts (no. / size / torque) | 8 / 7/8 in. / 50-60 ft-lb |
|---|---|
| T-bolts (no. / size / torque) | 8 / 3/4 x 4 in. / 75-90 ft-lb |
| Gasket | MG12 |
| Installation order | T-bolts in a star pattern to torque, then the actuating bolts in a star pattern until every top breaks off, never more than 180 degrees on one bolt at a time |
| IPS pipe | Take off the two-piece spacer and use a transition gasket |
| Tools | No special tools |
| Gland body, wedge inserts and actuating bolts | ASTM A536 Grade 65-45-12 ductile iron |
|---|---|
| Dimensions | To ANSI/AWWA C111/A21.11 and ANSI/AWWA C153/A21.53 |
| UL listing | 4 to 12 in., tested to ASTM F1674 |
| FM approval | 4 to 12 in., on AWWA C900 pipe, DR14, DR18 and DR25 |
| C909 pipe | Approved with Ipex C909 PVC pipe, per the submittal |
| Ratings by pipe class, per the submittal | C900, 4 to 12 in.: 305 psi on DR14, 250 on DR17, 235 on DR18, 200 on DR21, 165 on DR25, 150 on DR27.5. IPS (ASTM D2241), 3 to 12 in.: 250 psi on SDR17, 200 on SDR21, 160 on SDR26, 125 on SDR32.5, 100 on SDR41. |
| Optional specifications, per the submittal | Gaskets: SBR, EPDM, neoprene or nitrile. Coatings: red alkyd paint or CorrSafe e-coat. Bolts and nuts: high-strength low-alloy steel, stainless steel (304 or 316) or blue fluoropolymer. |
| Traceability | Gland, wedges and actuating bolts cast with heat code information |
| Made | Import |
|---|---|
| Finish | Standard |
| Comes with | Gland |
| Sizes | 3 to 12 in. |
| Priced by request |
Showing Import, standard, gland. Item numbers follow the options above. Pick a size to load it.
| Size | Item # | Pressure | Pipe OD | Gasket | Weight |
|---|---|---|---|---|---|
| SLCS3 | 235 psi | 3.50 in. | TG3 | 8.0 lb | |
| SLCS4 | 235 psi | 4.80 in. | MG4 | 9.0 lb | |
| SLCS6 | 235 psi | 6.90 in. | MG6 | 13.0 lb | |
| SLCS8 | 235 psi | 9.05 in. | MG8 | 17.0 lb | |
| SLCS10 | 235 psi | 11.10 in. | MG10 | 24.0 lb | |
| SLCS12 | 235 psi | 13.20 in. | MG12 | 28.0 lb |
Gland weights leave out the T-bolts and gasket and can vary by 5%. SLCS is not on a posted price list, so it is priced by request.
SLCS is not on a posted SIGMA price list, so it is priced by request: add it to your quote list or call 800.999.2550. SIGMA sells through waterworks distributors, and your distributor sets your price. For contract pricing, ask your regional team.
Below the Add to quote list button. The SLCS submittal has the specifications, the dimensions by size and the ratings by pipe class; the SLCS catalog, under Documents, has the install steps. Posted SIGMA submittals are also in the Submittals Library.
The submittal rates it equal to the working pressure rating of the pipe it is installed on, with a 2:1 safety factor, and lists 235 psi at every size. Its chart rates it by pipe class: on C900 from 4 to 12 in., 305 psi on DR14 down to 150 psi on DR27.5; on IPS pipe from 3 to 12 in., 250 psi on SDR17 down to 100 psi on SDR41.
Yes. The SLCS submittal notes approval with Ipex C909 PVC pipe, and SIGMA's sheet for AWWA C909 PVCO pipe (May 2026) lists SLCS from 4 to 12 in. The restraint's rated pressure is limited to the pipe's. On C909 pipe, do not over-tighten the T-bolts.
Yes, from 3 to 12 in. (ASTM D2241). Take off the two-piece spacer on the actuating bolts; it comes off without taking the gland apart. A transition gasket is required. On C900 pipe, leave the spacer on.
Both are wedge-action glands for a mechanical joint on PVC pipe. SLCS runs 3 to 12 in. and uses more wedges at 3 to 10 in., and its submittal adds approval with Ipex C909 PVC pipe. SLCE runs 3 to 60 in. and is on SIGMA's import and domestic price lists. Not sure which fits your job? Ask your regional team.
No special tools. Break-off bolt tops show the crew when each wedge is set.
SLCS gland, catalog render.
ONE-LOK glands at mechanical joints on PVC pipe.
A mechanical joint T-bolt and nut.
Break-off actuating bolts (SLCE shown).
Same idea, built for a different joint, pipe or pressure.

Wedge-action restraint for PVC pipe at a mechanical joint. UL listed and FM approved, 4 to 12 in.

Bell harness for C900 and IPS PVC: an SLCE gland on the spigot, tied with rods to a ring behind the bell.

Serrated restraints for C900/C905 and IPS PVC pipe at bell joints, ductile iron fittings and PVC fittings.

Wedge-action restraint for ductile iron pipe at a mechanical joint.
Send your quote list to your regional team, or call.