
Standard (cement lined)
Cement mortar lining with an asphaltic seal coat inside, per AWWA C104. Asphaltic coating outside; flanged fittings are red primer outside.
Not sure which part fits?
Your regional team can match the job to the right product.
Can’t find what you need?
Your regional team can send it or point you to it.
The water company you can count on. Because of the people behind it.
Home › Coatings and Linings
For distributors, contractors and engineers choosing how ductile iron fittings are protected, inside and out.
✓ Double cement lining ✓ A price list for each coating
A lining protects the inside of a fitting; a coating protects the outside.
In the field: seal coat or asphalt (the black standard coating), red primer, epoxy, ceramic epoxy, zinc.

Cement mortar lining with an asphaltic seal coat inside, per AWWA C104. Asphaltic coating outside; flanged fittings are red primer outside.

Red epoxy inside and outside, 8 mils minimum, per AWWA C116. 2 to 48 in.; domestic flanged to 54 in.

A ceramic epoxy lining inside, 40 mils nominal, for sanitary sewer service, applied by an outside applicator.

Zinc-rich paint under the asphaltic top coat, per ISO 8179-2. The zinc corrodes first and protects the iron.

The ceramic epoxy lining inside and SIGMA Z-COAT outside, on one import price list. There is no domestic price list for this pair.

Bare iron, with no lining or coating, is on the fittings price lists. For another primer or coating, ask your regional team what SIGMA can supply.
SIGMA's standard fittings are cement lined at double the AWWA lining thickness, under an asphaltic seal coat of at least 2 mils.
Handle them from the outside, with no forklift forks inside, and do not pressure wash them; call 800.999.2550 first.
Coating information sheets and white papers are in the Technical Library.
1/8 in.
Cement lining on 2 to 12 in. fittings, double the 1/16 in. AWWA thickness.
1/4 in.
Cement lining on 30 to 64 in. fittings, double the 1/8 in. AWWA thickness.
From SIGMA's Lining Technical Bulletin, December 2025.
Standard and bare are on the fittings price lists, linked on the Ductile Iron Fittings and Domestic Products pages.
Fusion bonded epoxy (FBE): C153 MJ, C110 MJ, C110 flanged, C153 push-on. Effective 1/5/2026
FBE: C153 MJ, C110 MJ, C110 flanged, C153 push-on. Effective 12/1/2025
| Price list | Covers |
|---|---|
|
Import Fittings-Ceramic Epoxy price list (PDF) |
Ceramic epoxy lined: C153 MJ, C110 MJ, C110 flanged (item numbers start with 4-) |
|
Import Fittings-Zinc price list (PDF) |
SIGMA Z-COAT: C153 MJ, C110 MJ, C110 flanged, C153 push-on |
|
Import Fittings-Ceramic Epoxy and Zinc price list (PDF) |
Ceramic epoxy lined with SIGMA Z-COAT: C153 MJ, C110 MJ, C110 flanged |
|
Domestic Fittings-Ceramic Epoxy price list (PDF) |
Ceramic epoxy lined: C153 MJ, C110 MJ, C110 flanged (item numbers start with D4-) |
|
Domestic Fittings-Zinc price list (PDF) |
SIGMA Z-COAT: C153 MJ, C110 MJ, C110 flanged, C153 push-on |
Short answers. Your regional team has the rest.
A lining protects the inside of a fitting from the water or wastewater it carries. A coating protects the outside from the soil or air around it. A standard SIGMA fitting has both: a cement mortar lining with an asphaltic seal coat inside, and an asphaltic coating outside (red primer on flanged fittings).
SIGMA's lining bulletin recommends a ceramic epoxy lining, or an equal, for sewer service, and says not to use standard cement-lined fittings there. For other wastewater service, send the spec with the RFQ so the lining can be matched to it.
SIGMA does not recommend pressure washing standard cement-lined fittings, because it can damage the lining. If the fittings need cleaning, call 800.999.2550 first. Handle lined fittings from the outside, with no forklift forks inside the fitting.
On a fitting page, pick the coating under Coating to see the item number and, where one is posted, its price list. Take an 8 in. C153 MJ tee, import: DMT88 standard, DMT88B bare, EDMT88 FBE, 4-DMT88 ceramic epoxy lined, DMT88Z zinc, 4-DMT88Z ceramic epoxy and zinc. Domestic adds D- in front (D-DMT88, D-DMT88B, D-EDMT88, D-DMT88Z), or D4- for ceramic epoxy lined (D4-DMT88).
Send the spec with the RFQ. Your regional team checks whether SIGMA can supply the primer or coating it calls for, and quotes it for the job if so.
SIGMA Z-COAT is zinc-rich paint applied per ISO 8179-2. Arc zinc, per ISO 8179-1, is sprayed on molten. The SIGMA Z-COAT page compares the two.
Send the coating and lining spec with the RFQ to your regional team, or to the plant team for a treatment plant job.