
ONE-LOK SLCE
Wedge-action restraint for PVC pipe at a mechanical joint. UL listed and FM approved, 4 to 12 in.
Not sure which part fits?
Your regional team can match the job to the right product.
Can’t find what you need?
Your regional team can send it or point you to it.
The water company you can count on. Because of the people behind it.
The first image is the SLCEH catalog render; the others show the SLCE gland it uses and a large PVC job. Your size is in the item number.
Harness for push-on bell joints on PVC pipe: an SLCE wedge gland on the spigot, tied by rods to a two-piece back-up ring behind the bell.
Call for pricing
Priced by request at this size. Add it to your quote list or call 800.999.2550.
Your distributor
SIGMA sells through waterworks distributors. Order with item # SLCEH12.
Quote from SIGMA
Sends your quote list to the right regional team.
Submittal PDF not loaded yet.
Need help on the job?
Call 800.999.2550. Real people answer, mid-job too.
Right restraint? Selection ToolHow far to restrain? Calculator
ONE-LOK SLCEH · SLCEH12
Details, specs, every size and the questions buyers ask. Open what you need.
Water under pressure pushes a push-on bell joint apart. ONE-LOK SLCEH holds it on PVC pipe: an SLCE wedge-action gland grips the spigot, and restraining rods tie it to a two-piece back-up ring seated against the bell. The submittal rates it equal to the working pressure of the pipe joint it is installed on, with a 2:1 safety factor.
| Item number | SLCEH12 |
|---|---|
| Pressure rating, submittal table | 235 psi |
| Pressure rating rule | Equal to the working pressure rating of the pipe it is installed on, per the submittal |
| Safety factor | 2:1, per the submittal |
| Joint deflection | Within the pipe maker's allowable deflection for C900 PVC pipe bells, per the submittal |
| Minimum rod clearance | 15.50 in. |
| Harness weight: back-up ring, SLCE gland and rods | 73.62 lb |
| Wedge gland | ONE-LOK SLCE, 12 in. |
|---|---|
| Back-up ring | Assembly bolts to 90 ft-lb, per the catalog |
| Restraining rods | 8 rods, 3/4 x 24 in. |
| Installation order | Back-up ring behind the bell, then the gland and rods, then the wedge bolts in a star pattern until every top breaks off |
| Tools | No special tools |
| Gland body, wedge inserts, actuating bolts and back-up ring | ASTM A536 Grade 65-45-12 ductile iron |
|---|---|
| Restraining rods and nuts | High-strength, low-alloy steel to AWWA/ANSI C111/A21.11, 65,000 psi tensile and 45,000 psi yield minimum, per the catalog |
| Side clamping bolts and nuts | ASTM A449 high-strength steel, per the catalog |
| Ratings by pipe class, per the catalog | C900, 4 to 12 in.: 305 psi on DR14, 235 on DR18, 165 on DR25. IPS (ASTM D2241), 3 to 12 in.: 250 psi on SDR17, 200 on SDR21, 160 on SDR26. |
| Optional specifications, per the submittal | Coatings: asphaltic black enamel or CorrSafe e-coat. Bolts and nuts: high-strength low-alloy steel, stainless steel (304 or 316) or blue fluoropolymer. |
| Made | Import |
|---|---|
| Finish | Standard |
| Comes with | Harness |
| Sizes | 3 to 12 in. |
| Priced by request |
Showing Import, standard, harness. Item numbers follow the options above. Pick a size to load it.
| Size | Item # | Pressure | Rod clearance | Rods | Weight |
|---|---|---|---|---|---|
| SLCEH3 | 235 psi | 5.45 in. | 4 rods, 5/8 x 17 in. | 13.61 lb | |
| SLCEH4 | 235 psi | 6.75 in. | 4 rods, 3/4 x 17 in. | 19.18 lb | |
| SLCEH6 | 235 psi | 8.75 in. | 6 rods, 3/4 x 18 in. | 29.76 lb | |
| SLCEH8 | 235 psi | 11.00 in. | 6 rods, 3/4 x 18 in. | 36.84 lb | |
| SLCEH10 | 235 psi | 13.25 in. | 8 rods, 3/4 x 24 in. | 50.40 lb | |
| SLCEH12 | 235 psi | 15.50 in. | 8 rods, 3/4 x 24 in. | 73.62 lb |
Weights are for the full harness: back-up ring, SLCE gland and rods. SLCEH is not on a posted price list, so it is priced by request.
SLCEH is not on a posted SIGMA price list, so it is priced by request: add it to your quote list or call 800.999.2550. SIGMA sells through waterworks distributors, and your distributor sets your price. For contract pricing, ask your regional team.
Below the Add to quote list button. The SLCEH submittal has the specifications and the rods, clearance and weight by size; the SLCEH catalog, under Documents, has the ratings by pipe class and the install steps. Posted SIGMA submittals are also in the Submittals Library.
A ONE-LOK SLCE wedge-action gland for the spigot, a two-piece back-up ring for behind the bell, and restraining rods with nuts. The rod count, diameter and length for each size are under Specifications.
The submittal names AWWA C900 PVC pipe. The catalog rates it on C900 DR14, DR18 and DR25 from 4 to 12 in., and on IPS pipe (ASTM D2241) SDR17, SDR21 and SDR26 from 3 to 12 in. For IPS pipe, take off the two-piece spacer on the gland's actuating bolts.
SLCEH restrains a push-on bell joint, pipe to pipe. SLCE restrains a mechanical joint at a fitting. For a bell joint with a serrated ring instead of wedges, see PV-LOK.
The SLCEH submittal and catalog list 3 to 12 in. For larger sizes, call 800.999.2550.
No special tools. Break-off bolt tops show the crew when each wedge is set.
SLCEH harness, from the catalog.
The SLCE gland the harness uses.
Large ONE-LOK restraints on a PVC job.
A large SLCE gland on PVC pipe.
Same idea, built for a different joint, pipe or pressure.

Wedge-action restraint for PVC pipe at a mechanical joint. UL listed and FM approved, 4 to 12 in.

Wedge-action restraint for C900, C909 and IPS PVC pipe. UL listed and FM approved, 4 to 12 in.

Serrated restraints for C900/C905 and IPS PVC pipe at bell joints, ductile iron fittings and PVC fittings.

Bell harness for push-on ductile iron pipe joints.
Send your quote list to your regional team, or call.