ONE-LOK SLCEH harness on a PVC pipe bell joint, catalog render

The first image is the SLCEH catalog render; the others show the SLCE gland it uses and a large PVC job. Your size is in the item number.

Item # SLCEH12 Questions and answers (6)

ONE-LOK SLCEH

Harness for push-on bell joints on PVC pipe: an SLCE wedge gland on the spigot, tied by rods to a two-piece back-up ring behind the bell.

Call for pricing

Priced by request at this size. Add it to your quote list or call 800.999.2550.

 

  • Submittal pressure rating: 235 psi at 12 in.
  • Rated equal to the working pressure of the pipe joint, with a 2:1 safety factor, per the submittal
  • No special tools; break-off bolt tops show when each wedge is set
Pipe size: 12 in.
Made: Import

Finish: Standard
Comes with: Harness

Per the catalog: a ONE-LOK SLCE wedge gland, a two-piece back-up ring, and restraining rods and nuts.

Your distributor

SIGMA sells through waterworks distributors. Order with item # SLCEH12.

Quote from SIGMA

Sends your quote list to the right regional team.

Download the SLCEH submittal

Need help on the job?

Call 800.999.2550. Real people answer, mid-job too.

Everything about the 12 in. SLCEH.

Details, specs, every size and the questions buyers ask. Open what you need.

Product detailsWhat it does, highlights and documents

About this product

Water under pressure pushes a push-on bell joint apart. ONE-LOK SLCEH holds it on PVC pipe: an SLCE wedge-action gland grips the spigot, and restraining rods tie it to a two-piece back-up ring seated against the bell. The submittal rates it equal to the working pressure of the pipe joint it is installed on, with a 2:1 safety factor.

Highlights

  • High-strength, low-alloy steel restraining rods and nuts, per the catalog
  • Contoured wedges support the PVC pipe wall
  • Cam action lets the wedges grip harder as thrust builds
  • Keeps the pipe maker's allowable bell deflection, per the submittal
Specifications12 in.: 235 psi · 15.50 in. min. rod clearance · 73.62 lb

At 12 in.

Item numberSLCEH12
Pressure rating, submittal table235 psi
Pressure rating ruleEqual to the working pressure rating of the pipe it is installed on, per the submittal
Safety factor2:1, per the submittal
Joint deflectionWithin the pipe maker's allowable deflection for C900 PVC pipe bells, per the submittal
Minimum rod clearance15.50 in.
Harness weight: back-up ring, SLCE gland and rods73.62 lb

Installation at 12 in.

Wedge glandONE-LOK SLCE, 12 in.
Back-up ringAssembly bolts to 90 ft-lb, per the catalog
Restraining rods8 rods, 3/4 x 24 in.
Installation orderBack-up ring behind the bell, then the gland and rods, then the wedge bolts in a star pattern until every top breaks off
ToolsNo special tools

Materials and standards

Gland body, wedge inserts, actuating bolts and back-up ringASTM A536 Grade 65-45-12 ductile iron
Restraining rods and nutsHigh-strength, low-alloy steel to AWWA/ANSI C111/A21.11, 65,000 psi tensile and 45,000 psi yield minimum, per the catalog
Side clamping bolts and nutsASTM A449 high-strength steel, per the catalog
Ratings by pipe class, per the catalogC900, 4 to 12 in.: 305 psi on DR14, 235 on DR18, 165 on DR25. IPS (ASTM D2241), 3 to 12 in.: 250 psi on SDR17, 200 on SDR21, 160 on SDR26.
Optional specifications, per the submittalCoatings: asphaltic black enamel or CorrSafe e-coat. Bolts and nuts: high-strength low-alloy steel, stainless steel (304 or 316) or blue fluoropolymer.

Ordering

MadeImport
FinishStandard
Comes withHarness
Sizes3 to 12 in.
Priced by request
Every size and item number6 sizes, 3 to 12 in. · Import, standard, harness · item numbers

Showing Import, standard, harness. Item numbers follow the options above. Pick a size to load it.

ONE-LOK SLCEH item numbers and submittal data by pipe size
SizeItem #PressureRod clearanceRodsWeight
SLCEH3 235 psi5.45 in.4 rods, 5/8 x 17 in.13.61 lb
SLCEH4 235 psi6.75 in.4 rods, 3/4 x 17 in.19.18 lb
SLCEH6 235 psi8.75 in.6 rods, 3/4 x 18 in.29.76 lb
SLCEH8 235 psi11.00 in.6 rods, 3/4 x 18 in.36.84 lb
SLCEH10 235 psi13.25 in.8 rods, 3/4 x 24 in.50.40 lb
SLCEH12 235 psi15.50 in.8 rods, 3/4 x 24 in.73.62 lb

Weights are for the full harness: back-up ring, SLCE gland and rods. SLCEH is not on a posted price list, so it is priced by request.

Questions and answers6 questions buyers ask about SLCEH

Where do I find the price?

SLCEH is not on a posted SIGMA price list, so it is priced by request: add it to your quote list or call 800.999.2550. SIGMA sells through waterworks distributors, and your distributor sets your price. For contract pricing, ask your regional team.

Where is the submittal?

Below the Add to quote list button. The SLCEH submittal has the specifications and the rods, clearance and weight by size; the SLCEH catalog, under Documents, has the ratings by pipe class and the install steps. Posted SIGMA submittals are also in the Submittals Library.

What makes up an SLCEH?

A ONE-LOK SLCE wedge-action gland for the spigot, a two-piece back-up ring for behind the bell, and restraining rods with nuts. The rod count, diameter and length for each size are under Specifications.

Which PVC pipe does it fit?

The submittal names AWWA C900 PVC pipe. The catalog rates it on C900 DR14, DR18 and DR25 from 4 to 12 in., and on IPS pipe (ASTM D2241) SDR17, SDR21 and SDR26 from 3 to 12 in. For IPS pipe, take off the two-piece spacer on the gland's actuating bolts.

SLCEH or SLCE?

SLCEH restrains a push-on bell joint, pipe to pipe. SLCE restrains a mechanical joint at a fitting. For a bell joint with a serrated ring instead of wedges, see PV-LOK.

Is SLCEH made above 12 in.?

The SLCEH submittal and catalog list 3 to 12 in. For larger sizes, call 800.999.2550.

Harness the bell joint, in four steps.

No special tools. Break-off bolt tops show the crew when each wedge is set.

Clamp the back-up ring behind the bell.
Slide on the gland and set the rods.
Draw the ring against the bell.
Tighten the wedges until the tops break off.
ONE-LOK SLCEH harness on a PVC pipe bell joint, catalog render

SLCEH harness, from the catalog.

ONE-LOK SLCE wedge-action gland for PVC pipe, front view, with blue actuating bolts

The SLCE gland the harness uses.

Large ONE-LOK restraints on PVC pipe at a job site

Large ONE-LOK restraints on a PVC job.

ONE-LOK SLCE 60 in. gland installed on blue PVC pipe

A large SLCE gland on PVC pipe.

Other joints, other restraints.

Same idea, built for a different joint, pipe or pressure.

ONE-LOK SLCE restraint for PVC pipe

ONE-LOK SLCE

Wedge-action restraint for PVC pipe at a mechanical joint. UL listed and FM approved, 4 to 12 in.

SizesImport 3 to 60 in.Domestic D-SLCE 3 to 36 in.
Pressureto 235 psi, 4 to 24 in.
ONE-LOK SLCS wedge-action gland for PVC pipe, catalog render

ONE-LOK SLCS

Wedge-action restraint for C900, C909 and IPS PVC pipe. UL listed and FM approved, 4 to 12 in.

Sizes3 to 12 in.
Pressureto 235 psi
PV-LOK PWP-C24 bell joint restraint with its restraining rods, nuts and washers

PV-LOK

Serrated restraints for C900/C905 and IPS PVC pipe at bell joints, ductile iron fittings and PVC fittings.

Sizes2 to 48 in.
ONE-LOK SLDEH harness on a push-on ductile iron pipe joint, catalog render

ONE-LOK SLDEH

Bell harness for push-on ductile iron pipe joints.

Sizes3 to 48 in.

Pricing a job?

Send your quote list to your regional team, or call.